Helping UK homeowners save money on their heating

running tap

Insulating Your Hot Water Tank and Pipes


Insulating your hot water tank is a simple and cost effective way of keeping your energy bills down and reducing carbon dioxide emissions. The insulation will keep your water hot for longer as it prevents heat escaping from the tank. By insulating the water tank with a thick jacket (sometimes referred to as a lagging jacket), you can cut heat loss by up to 75% and the cost can be recouped in less than a year. It’s also an environmentally friendly option saving around 160kg per year in carbon dioxide emissions.

Insulation jackets can be purchased from any good DIY store from around £10 and can save you around £10 – 15 a year on heating costs.

The jackets come ready made and fit a variety of standard sizes. Use a tape measure to calculate the height and girth of the tank to ensure you buy one which fits neatly. The thickness of the jacket should be at least 80mm. If you already have insulation for your hot water tank, check to make sure it’s no thinner than this. If it is, you can add a second jacket or replace it completely. When buying a new jacket, ensure it conforms to British Safety Standards BS 5615 (1985).

Fitting the jacket is a straightforward task and can be done easily yourself without the need for a skilled tradesperson. The jacket is made up of several segments held together with a cord, which ties over the top of the tank. Straps are used to keep the jacket fitted securely but shouldn’t be tied too tightly.

Before fitting the jacket, turn off any heating and allow the tank to cool. Follow the manufacturer’s instructions to fit the insulation correctly. It’s important not to apply too much pressure when smoothing down the jacket as this can cause the insulation to be less effective.

If your hot water tank is in an airing cupboard, the insulation will reduce the amount of heat circulating. If you want to allow some heat through, tie the segments of the jacket slightly looser, with a few gaps. Otherwise the segments should be overlapped to prevent heat escaping.

If you’re living in a newly built house or have just purchased a new hot water tank, there is no need to fit an insulating jacket, as new hot water tanks come with foam insulation already fitted. This new method is much more effective as a means of insulation.

Pipe Insulation

Fitting insulation to your pipes will help keep water hot and will prevent the pipes from freezing or bursting in cold weather.

Lagging your pipes can reduce heat loss by up to 75% and can help cut down carbon dioxide emissions by around 70 kilograms each year and alongside other home insulation methods such cavity wall insulation and loft insulation will significantly reduce energy costs.

The cost of the materials should only be around £10 and can be bought at all good DIY stores or builder’s merchants. You can save around £5 – 10 a year on your energy bills by insulating pipes, so the initial outlay can be recovered in as little as a year or two.

It isn’t necessary to insulate the pipes in the living area of the home as there is enough heat generated there to keep them warm. It is important however, to insulate the pipes in the coldest places in your home, such as the loft. If these are left without protection, there’s a good chance they could freeze up and burst during particularly cold spells, doing severe damage to your home.

If at all possible, all pipes should be insulated – cold water pipes to prevent freezing in winter and hot water pipes to avoid heat loss and conserve energy.

Fitting pipe insulation is a relatively simple task although you may need professional help to fit it around the more awkward to reach places.

There are several different types of insulation material available. The easiest to fit is the foam tubing type, which slips over the piping and is then taped securely. Always choose insulation with a thickness of at least 20mm.

Post navigation

PREVIOUS POST

With so many different boilers on the market it can be a minefield to know which one...

Post navigation

NEXT POST

We’ve compared the 3 leading boiling water taps in UK to help you make the right choice...

British Gas Boiler Offer

0% APR for 3 Years on a New Boiler from British Gas

FREE Boiler Quotes

Get 3 FREE boiler quotes from local trustworthy heating engineers now

Warmzilla New Boiler Offer

Get a fixed price quote on your new boiler now!


ad300x250-boilerinstall-blog

British Gas Boiler Offer